|
START UP
REMOVE LEAVES AND OTHER DEBRIS.
CHECK ALL PIPE CONNECTIONS AND TIGHTEN. SNUG UP HEX NUT ON ALL GATE VALVES.
POUR _____OZ OF RUST AND SCALE CONTROL (HYDROQUEST) DIRECTLY INTO POOL, FOLLOWED BY _____OZ ONCE EACH WEEK.
"SHOCK" POOL WATER WITH _____LB OXY-SHOCK TREATMENT BY BROADCASTING OVER AS MUCH OF POOL AREA AS POSSIBLE. AFTER THAT, _____LB EVERY TWO WEEKS.
POUR _____OZ CHLORINE CONCENTRATE INTO POOL EVERYDAY UNTIL YOU MAINTAIN A READING OF 1.5 ON TEST KIT. AFTER THAT, ENOUGH TO MAINTAIN 1.5 READING.
POUR _____OZ OF ALGAECIDE INTO DIFFERENT PARTS OF POOL, FOLLOWED BY _____OZ ONCE EACH WEEK.
WAIT 24 HOURS, THEN START FILTER (DIATOMACEOUS EARTH FILTER ONLY).
ADJUST P.H. TO READ 7.4 USING LIQUID OR DRY ACID WHEN P.H. IS HIGH, OR SODIUM CARBONATE WHEN P.H. IS LOW.
AFTER POOL IS CLEAN, MIX _____LB CONDITIONER, 1 POUND AT A TIME, WITH WATER, AND POUR INTO SKIMMER.
CLEAN FILTER OR FILTER MEDIA WITH FILTER KLEEN.
USE CLARITABS IF YOU HAVE A SAND FILTER.
CHECK P.H. TWICE EACH WEEK. CHECK
CHLORINE READING EVERY DAY. MAKE
SURE YOUR OTO AND PHENOL RED TEST
KIT SOLUTIONS ARE FRESH AND USABLE.
NOTE: IF POOL IS EQUIPPED WITH A SAND FILTER IN PLACE
OF A DIATOMACEOUS EARTH FILTER, A HEAVY CHARGE OF CHLORINE
|
|
